Certified Stucco Inspections

A service of Tennessee Building Inspections

Home
What You Should Know
About Us
Our Training
Contact Us
Site Map
What is EIFS ?
FAQS
Our Technology
Our Services
Inspection Standards
EDI Standards of Practice
GAHI Inspection Protocol
Warranty Programs
Buyer Information
Realtor Information
Owner Information
Links
Inspection Photos
Images
 
 

   

The Exterior Design Institute is a non-profit organization founded for the purpose of training and certifying Building Envelope and EIFS Inspectors and Moisture Analysts to promote quality control within the construction industry. 

 http://www.exterior-design-inst.com/

 

 

 

EDI holds our inspectors to incredibly high standards. By taking and passing the EIFS Third Party Inspector Certification Course, our students agree to never deviate from our established code of ethics and standards of practices. You may view them below.

 

 

EDI Standards of Practice

1. Introduction

1.1 Exterior Design Institute (EDI)

EDI is a professional organization established in 1996, whose membership consists of private, fee paid exterior cladding inspectors. EDI's ideals include the promotion of a higher standard within the profession and continual improvement of its members services to the public.

1.2 These Standards of Practice:

  • A. Make public the services provided by EDI fee paid inspectors.
  • B. Provide inspection guidelies and limitations.
  • C. Define the terms on which the inspection is performed.

2. Scope and Purpose

2.1 EDI inspections performed in accordance with these guidelines are intended to provide the building owner or client with a better understanding of the exterior cladding system and component conditions as observed at the time of inspection.

2.2 EDI Inspector shall:

  • A. Observe all installed EIFS and stucco wall components listed elsewhere in these standards.
  • B. Submit a written, signed report to the person or persons outlined in their contract. The report shall:
    • 1. Describe those components specified, as listed elsewhere in these standards
    • 2. State which components were inspected as listed elsewhere in these standards.
    • 3. State which components as listed elsewhere in these standards that were not inspected and why.
    • 4. State any components that are listed elsewhere in these standards that are in need of correction, modification, or immediate repair in order to bring the system to industry and/or manufacturer standards.

    2.3 EDI inspection standards are not intended to limit the inspector from:

    • A. Reporting conditions or observations that directly relates to the performance or life of the inspected wall system and its components.
    • B. Including other systems and components into the inspection if requested by the person or persons for whom the inspection is performed.

      2.4 EDI inspection standards are not intended to override local laws.

      A. When these Standards of Practice are found to be in conflict with laws or statues of local jurisdiction, the local jurisdiction shall supersede.

      3. General Exclusions and Limitations

      3.1 General Exclusions

      • A. EDI Inspectors are NOT required to report on:
        • 1. The life expectancy of the wall system or any component of the system.
        • 2. The suitability of the wall system or product within the wall system for any specialized use.
        • 3. The compliance or non-compliance of the wall system and components with applicable code requirements.
        • 4. The method and materials required for the repair of the wall system or its components.
        • 5. The cost for the corrections to the wall system or its components.
        • 6. The condition of a wall system or a component of a wall system that could not be readily observed due to personal items, furniture, equipment, plant life, soil, snow, ice, debris or storage.
        • 7. The identification of wood destroying organisms including but not limited to insects, fungi, and rodents.
        • 8. The identification of any hazardous substances, environmental issues or biohazards, or to determine the condition of an installed system used to control the above conditions.
      • B. EDI Inspectors are not required to:
        • 1. Offer any warranties or guarantees of any kind.
        • 2. Offer any service or perform any act that is contrary to law.
        • 3. Perform any architectural or engineering service or perform any function that requires a license or permit within the state or township of the inspection, with the exception that a license is required to perform the standards as outlined within the scope of these Standards of Practice, and the responsible party has obtained the proper license or permit.
        • 4. Determine the strength, adequacy, life of, or efficiency of any wall system or component.
        • 5. Perform any procedure or destructive testing which may damage the wall system, components or property without prior written permission from the property or building owner.
        • 6. Move any personal items, furniture, equipment, plant life, or items that may obstruct access or visibility of the component or wall system being inspected, without first obtaining written permission from the property or building owner.
        • 7. Predict the future of any installed wall system or its components installed within the wall system.
        • 8. Predict the performance of wall system or components within the wall system in regards to sound proofing, insulation, or fire suppression.

      4. System Components and Details

      4.1 The EDI Inspector shall observe and report on:

      • A. Systems such as:
        • 1. PB - Polymer Based EIFS
        • 2. PM - Polymer Modified EIFS
        • 3. DEFS - Direct Applied EIFS
        • 4. OCS - One Coat Stucco Systems
        • 5. Quick R
        • 6. Drainage EIFS
        • 7. Traditional Hard Coat or Three Coat Stucco Systems
      • B. General Information such as:
        • 1. Age of system and components
        • 2. Approximate amount of applied material being inspected
        • 3. Direction on which the building and applied surfaces face. (North, South, East, West)
        • 4. Number of stories
        • 5. Temperature at time of inspection
        • 6. Weather conditions prior to and at the time of inspection
        • 7. Last rainfall
        • 8. Building or property owner
        • 9. EDI Member Number and Name
      • C. Accessible components such as:
        • 1. Framing type
        • 2. Roof covering type
        • 3. Substrate type if known
        • 4. Building wrap or moisture barrier if known
        • 5. Drainage mat if known
        • 6. Window type and manufacturer if known
        • 7. Door type and manufacturer if known
        • 8. Rigid foam type and manufacturer if known
        • 9. Fasteners type and manufacturer if known
        • 10. Starter track
        • 11. Flashings
        • 12. Trim accessories
        • 13. Reinforcing mesh type and manufacturer
        • 14. Base coat type and manufacturer
        • 15. Finish coating type and manufacturer
        • 16. Sealant or adhesive type and manufacturer
      • D. Accessible details such as:
        • 1. Sealant around window perimeters
        • 2. Sealant around door perimeters
        • 3. Miter joints around windows and doors
        • 4. Fixed window mullions and joints
        • 5. Head flashings at window tops
        • 6. Head flashings at door tops
        • 7. Pan flashing at window sills
        • 8. Penetrations at door threshold/track
        • 9. Backwrapping
        • 10. Expansion joints
        • 11. Control joints
        • 12. Aesthetic grooves
        • 13. Butterfly mesh
        • 14. Type of fastening system used on foam
        • 15. Substrate nailing pattern
        • 16. Foam fastening installation pattern
        • 17. Openings in foam
        • 18. Evidence of foam rasping prior to base coat installation
        • 19. Base coat thickness
        • 20. Top coat thickness
        • 21. Transitions at accessories such as vinyl, brick, wood, and other dissimilar materials
        • 22. Termination at grade
        • 23. Termination at concrete slabs
        • 24. Deck flashings
        • 25. Flashing at columns
        • 26. Kick out flashings
        • 27. Roof wall flashings
        • 28. Wall soffit termination
        • 29. Roof wall termination
        • 30. Wall fascia termination
        • 31. Chimney crickets
        • 32. Chimney flashings
        • 33. Gutters
        • 34. Wall penetrations
        • 35. Accessories, flashings and sealant used
      • E. General Appearance
        • 1. Cracking observed and loaction
        • 2. Exposed mesh observed and location
        • 3. Chalking surface (efflorescence) observed and location
        • 4. Uneven surface texture observed and location
        • 5. Poor or missing sealant observed and location
        • 6. Stains observed and location
        • 7. Impact damage and location
        • 8. Flat areas and location
        • 9. Breaching of surface by other trades and location
        • 10. Vegetation, grading, drainage, driveways, patios, walkways, and retaining walls with respect to their effect on the condition of the exterior wall system or its components
        • 11. Accessories and attachment methods

      5. Moisture Testing and Analysis

      5.1 The EDI Inspector shall observe and report on:

      • A. Methods of Testing
        • 1. Reasons for testing
        • 2. Locations of testing areas
        • 3. Amount of testing areas
        • 4. Type of test performed
        • 5. Result of tests performed
      • B.1 Examine areas of potential water intrusion
        • 1. Glazing
          • 1.1 Gaskets
          • 1.2 Weeps
          • 1.3 Sealants
          • 1.4 Perimeter sealants
          • 1.5 Unauthorized alterations
        • 2. Penetrations
          • 2.1 Designed penetrations
          • 2.2 Post-construction penetrations
          • 2.3 Sealants
          • 2.4 Unauthorized alterations
        • 3. Wall Area
          • 3.1 False joints(cracking)
          • 3.2 Designed joints
          • 3.3 Post-construction joints
          • 3.4 Cracks
          • 3.5 Impact damage
          • 3.6 Bird nest, or insect damage/holes
          • 3.7 Unauthorized alterations
        • 4. Roof/Wall Interfaces
          • 4.1 Copings
          • 4.2 Parapets
          • 4.3 Penetrations
          • 4.4 Flashings
          • 4.5 Roof areas
      • B.2 Inspect and report on all accessible elevations or water entry points.
      • C. Inspect and report on accessible interior areas. Probe interior finished areas and structural components where deterioration is suspected.
        • 1. Report the signs of water penetration into the building or signs of abnormal condensation on building components
      • D. Test equipment used:
        • 1. Type of test equipment used
        • 2. Method of calibration of test equipment used

    EDI Code of EthicsSECTION A

    The Members of the Exterior Design Institute (EDI) are committed to providing quality and professional service to the public. This Code of Ethics sets forth principles and rules of conduct enforced by EDI through specific procedures contained in Section B, Judicial Procedures. This Code of Ethics is applicable to all EDI Members and EDI affiliates as defined in the EDI bylaws.

    PRINCIPLE 1: QUALITY OF CARE

    Members shall commit to ongoing professional development and education as established by the EDI Board of Directors and the EDI bylaws.

    PRINCIPLE 2: INDIVIDUAL RIGHTS

    Members shall strive to recognize and respect the rights, dignity and individuality of all persons. A Member shall not unlawfully discriminate or knowingly permit unlawful discrimination on the basis of race, national origin, sex, sexual orientation, religion, age or disability.

    PRINCIPLE 3: REPRESENTATION OF CARE AND FEES

    PRINCIPLE 4: CONFLICTS OF INTEREST

    PRINCIPLE 5: CONDUCT OF MEMBERS

    SECTION B

    PREAMBLE

    The Ethics Committee is comprised of the Ethics Chairperson and Members of EDI appointed to the Ethics Committee. It is the duty of each EDI Member to promptly and confidentially report, in writing, any evidence of another Member engaging in unethical practices or other violations of this Code of Ethics. The report shall cite the specific applicable principle of the Code of Ethics that has allegedly been violated. Members shall submit in writing all questions and disputes regarding interpretation of the Code of Ethics for investigation and resolution. This submittal shall cite specific principles of the Code of Ethics that are in question or dispute.

    1. PROFESSIONAL CONDUCT: The professional conduct of the Members shall be governed by the EDI Code of Ethics.

    2. PLEDGE: Every Member by joining or renewing Membership in EDI pledges to adhere to this Code of Ethics.

    3. CONDUCT SUBJECT TO DISCIPLINE: A Member may be subject to disciplinary sanctions or expulsion, if the Member has:

    In the event of (a) or (c) above, the Member shall have an affirmative obligation to notify the Ethics Committee in writing in an expeditious manner about said occurrence.

    COMPLAINTS PROCESS:

    1. INITIATION OF COMPLAINTS: Complaints raising disciplinary considerations against a Member may be made by any interested party. All complaints must be submitted to the Ethics Committee through EDI Headquarters in writing and supported by credible and relevant evidence. Complaints/claims shall be tendered to EDI Administrative Headquarters via the current complaint form. EDI shall track and monitor the status of all complaints.

    As a matter of policy, once a complaint has been filed against a Member, the investigation will be completed even if that Member voluntarily withdraws Membership from EDI. If in the opinion of the Ethics Committee a complaint impacts the reputation of EDI, the complaint will be investigated.

    2. INVESTIGATION OF COMPLAINTS:

    3. CONFIDENTIALITY: Confidentiality by the Members of the Ethics Committee is to be strictly maintained during the judicial proceedings and continue except to the extent reasonably necessary for a full review of the facts.

    4. DISCIPLINE: The Ethics Committee may impose any of the following sanctions in the event the Committee finds that a Member violated the Code of Ethics after conducting a due process hearing:

    Reinstatement: Upon written application, for good cause shown, and in the sole discretion of the Ethics Committee, an expelled individual may be reinstated to all rights and privileges as a Member in good standing.

    5. DECISION: The decision of the Ethics Committee, following the hearing shall be subject to the ratification of the Board of Directors.

    6. APPEAL: The Member may appeal the decision of the Ethics Committee and the Board of Directors by filing a statement of particulars with the President of EDI, no later than sixty (60) days after the mailing decision accompanied by a request for a hearing before the Appeals Board..

    7. APPEALS BOARD: The Appeals Board shall be composed of three (3) Members to be selected by the current President of EDI. The Appeals Board may be comprised of Past-President, current or past-Board of Directors Members, past Appeals Board Members, not more than one Member of the current Ethics Committee, past-Ethics Committee Members, and/or other individuals the EDI President may select. All decisions shall be stayed pending appeal. All notice and hearing requirements shall be applicable to appeals to the Appeals Board. When feasible, the Appeals Board shall hold it's hearing at the next Board of Directors meeting following the receipt of notice to appeal. The decision of the Appeals Board following the appeal shall be final.

    8. HOLD HARMLESS: Every Member of EDI does waive the right to hold EDI, its directors, officers, Members and/or employees responsible for any damage, pecuniary or otherwise, which may result from discipline associated with disciplinary proceedings against said Member.

    INTERPRETATION AND APPLICATION OF CODE OF ETHICS

    The preceding statements constitute the Code of Ethics of the Exterior Design Institute (EDI). Problems involving questions of ethics will be solved within the broad boundaries as established in this Code of Ethics. Members found guilty of unethical conduct as described in the EDI Code of Ethics are subject to penalties.